Lansperse BA6
Product Category: Coatings Additives
BioLoop Dispersing Agent for Aqueous Systems
Dispersing agents are used extensively in the coatings industry to help disperse solid particles into a liquid medium.
Dispersing agents perform by the anchoring of the surfactant onto the particle substrate and then acting as a barrier to stop re-agglomeration of the particles. This concept is often referred to as steric stabilisation. Our products have been developed using a natural backbone which contains anchoring groups. What makes them unique is the introduction of a hydrophilic loop that not only has an affinity for water and polar solvents but also provides both steric hindrance and stability. Also to help boost the hydrophilic nature within the spacing between the particles Lansperse BA6 contains both loops and tails and an extra large anchoring. This helps to give further improvements in stability and flocculation reduction.
Key Features
-
Based on the BioLoop technology
-
Powerful dispersing properties
-
Low flocculation
-
VOC free
-
Fast particle size reduction
-
Good ecotoxicity
-
No skin or eye irritancy
Applications
Dispersing agents for:
-
Organic Pigments
Specification
Appearance
Light amber liquid
Colour
10 gardner max
Solids content %
38 - 42
Typical Properties
Composition
BioLoop dispersant with tails and anchor
Odour
Characteristic
Viscosity at 25°C (cP)
60
Specific gravity at 20°C
1.04
Pour point °C
~8
Flash point closed cup °C
>100