Lansurf AE315W
Product Category: Nonionics
C13 Alcohol with 15 moles of Ethylene Oxide
INCI Name: Trideceth‑15
Lansurf AE315W is a nonionic surfactant produced by the reaction of ethylene oxide with a synthetic primary alcohol. It is a C13 alcohol ethoxylate containing approximately 15 moles of ethylene oxide. The product exhibits excellent oil/water and water/oil emulsification, along with effective wetting and detergency properties.
​
Lansurf AE315W is particularly well suited for use as an emulsifier in emulsion polymerisation, where it helps produce stable polymer latexes. It is widely applied in systems based on vinyl acetate, styrene, and acrylic monomers, including both homopolymers and copolymers.
​
Key Features
​
-
Good emulsification, providing strong oil‑in‑water and water‑in‑oil emulsifying performance for a wide range of formulation systems.
-
High detergency, delivering excellent cleaning efficiency suitable for industrial, institutional, and domestic detergent applications.
-
Superior wetting, demonstrated by favourable wetting performance (Draves), enabling rapid surface penetration in textiles, coatings, paper, and cleaning formulations.
Applications
​
Textile Auxiliaries
- Wetting agents
- Scouring agents
- Dyeing assistants
- Emulsifiers for oils, finishes, and processing baths
​
Metal Processing
- Emulsifiers for metalworking and cutting fluids
- Cleaners and degreasers
- Additives improving wetting and penetration
​
Paper Processing
- De‑inking aids
- Wetting agents
- Emulsifiers in coating formulations
​
Leather Industry
- Degreasing agents
- Wetting and dispersing agents
​
Industrial & Domestic Detergents
- Laundry liquids & powders
- Hard‑surface cleaners
- Degreasers
- Multi‑purpose cleaners
- Hand dishwashing liquids
​
Agrochemicals
- Solubilisers and emulsifiers in pesticide formulations
- Wetting agents in herbicides and fungicides
​
Paints & Coatings
- Emulsifiers in latex systems
- Dispersants for pigments or additives
- Stabilisers for polymer dispersions
​
Applications in Emulsion Polymerisation
Lansurf AE315W is an excellent emulsifier for producing stable polymer latexes, particularly in:
- Vinyl Acetate – Homopolymers
- Vinyl Acetate – Acrylic Copolymers
- Styrene – Homopolymers
- Styrene – Acrylic Copolymers
- Acrylic Monomers (Esters & Acids)
​
These latexes are typically used in:
Adhesives
Paints & coatings
Construction chemicals
Paper binders
Textile binders
Specification
Appearance at 25°C
Clear liquid free from foreign matter
Solids content %
78.0 - 82.0
Cloud point °C (1% in 10% NaCl solution)
61.0 - 67.0
pH (5% aqueous)
5.0 - 8.0
Typical Properties
Composition
Alcohol ethoxylate
Odour
Characteristic
Specific gravity at 20°C
1.00
Flash point open cup °C
>100
CAS number
78330-21-9
HLB value
15.5
Solubility in water
Soluble
Surface tension st 0.1% aqueous (mN/m)
32
Moles of EO
15
Viscosity at 25°C (cP)
121
Pour point °C
5
